How to install a Satellite dish yourself?

Installing a satellite dish requires some technical expertise, but with the right tools and guidance, you can do it yourself. So no need to find a satellite dish installation near me, because access this satellite dish installation guide, to understand How much does it cost to have a dish TV installed? In what direction do you face a satellite antenna? How long does it take to install a satellite dish? So if you are looking that how to install a satellite dish yourself on the roof without a meter and without giving any satellite dish installation cost. all the information is here. Please check the given below tips which may help you to install a free-to-air Dish antenna. So you can understand how to install a satellite dish yourself.

Location:

1. Before installing your dish antenna, properly check that you have a clear location – It means – No Mobile tower, no trees, and no building between your dish and satellite. 2. If your roof you do not have a clear location please contact an expert or local dish installation expert, because you may face lots of trouble and you can waste your time.

Tools required for Dish Installation –

1. First of all, you need a good compass, which can tell you information about the right “Azimuth” and “Elevation” for your location.
2. The second item you need is a Satellite signal finder, which should be digital, for more accuracy.
3. Now fit your dish antenna on Pol, and set the correct angle for your dish, you can use an angle finder for more accuracy.
4. Always use a MPEG-2 satellite receiver, because it works great as a satellite finder, when you find signals then you can do a blind scan at that time. Because you can get another satellite so you can verify by auto search in the set-top box.
5. Please do not use your satellite finder or set-top box opposite the dish antenna, always use these things in the backside for the correct signal status.

So if you have a location available to install a dish antenna, then you can install a dish antenna at your own home. However, it takes more time. Because first, you should come to put the dish antenna in the right direction, and if you put it in the right direction, then the settings should come correctly to receive the satellite signal, in dish antenna settings and set-top box settings are important. In this post, there is talk of installing a dish antenna, then you can follow the methods given below to install a dish antenna.

Selection –

To install a dish antenna, you need to know from which satellite you will receive the signal of which satellite TV service. Like if you are in India then want to set up a free satellite service DD free dish or pay DTH service. If you want to install Pay Satellite Services like Dish TV, D2H, Airtel DTH, Sun Direct, or Zing Digital, then you can call their customer care, and their executive will install it and go away. So are Dish Network or DirecTV in the USA, BBC HD or Sky TV in the UK, VAST in Australia, Astra Satellite in France, and other satellite TV services in other countries. But if you want to install free DTH then you can do this installation.

What equipment do I need?

If you want to watch free TV channels, then you have to buy a free-to-air satellite set-top box, LNB, coaxial cable, connectors, and a satellite dish of at least 65 cm in diameter.

Assemble your satellite dish –

Follow the instructions provided to assemble your satellite dish. This mainly involves fitting the LNB to the antenna, with the connectors at the bottom. For this, a dish of 60 cm will be enough

Choose your mount –

The mount you choose will depend on where you want to mount your dish, you should learn how to install it from the seller when you buy the dish. Tell the shopkeeper that you want to mount the dish on the wall or on the ceiling, so that the shopkeeper can see the mount which is right for you.

Mount your satellite dish?

• If you want to install it on the roof, make a stand with 10-15 bricks on the roof. Then fitting the antenna on it. And if you are applying it on the wall, then apply it facing straight ahead. The direction of the wall should be the same as the direction of your satellite.
• Mount the dish to the pole, making sure the bolts are tight enough that you can move the dish from side to side with a little pressure, but not so loose that the dish will move on its own.
• use the compass, and rotate the antenna.
• The easiest way is to use a satellite finder, which makes a whistling sound when it receives a signal from the LNB.
• After receiving the signal, tighten all the bolts and screws tightly, so that the dish can be prevented from moving in strong winds. Mark the pole with a marker so that you can tighten it easily next time.
• Now connect the coaxial cable to LNB and set-top box.
• Use the drill to make a hole for the cable.
• Now you can blind scan your satellite receiver

First note: check if there are any restrictions on where you can mount the dish, especially if you rent, or live in a conservation area. so if you completed these steps it means you have successfully installed your dish antenna. You can find more topics about Dish installation.