If you also have an IPTV encoder and want to broadcast live on your YouTube channel on YouTube, then you can contact us and let us know, we are providing free support for the installation of audio and video devices. In this episode, someone asked us if you have recently purchased the TBS 2603 encoder of the TBS brand but you are not able to broadcast live on YouTube in it. If you also have a similar problem then this information is for you.
First of all, you have to open two tabs in your internet browser.
View Now
In the first TAB –
Open YouTube Studio in the first TAB from where you will get the RTMP URL of YouTube and a secret code to broadcast live.
In the second TAB –
In the second tab of the internet browser, you have to open the admin page of your TBS 2603. For this, you have to connect your TBS 2603 to the same modem or network, then enter 192.168.1.168 in that tab, enter admin in the username, and root in the password. However, these details may vary, so check the sticker on your encoder.
Settings of YouTube Live in TBS 2603 –
Now let’s come to the settings. For this, you have to see the settings in the image below in which RTMP has to be enabled and the rtmp url has to be entered in front of it.
Tbs 2603 YouTube live setup
And according to the image below you have to enter the secret code.
Now you just have to give HDMI input in your encoder, for this, you can give input from any set-top box or Android box. After just a few minutes you will see that live streaming has started on your YouTube.
If you want, you can broadcast it live 24/7, you just have to connect the encoder to a UPS or inverter and run it continuously.
Also Read – How to Stream to YouTube without Computer/PC/Laptop?
Please keep boosting our courage by following and subscribing to continue providing free support. If you also have any problem regarding the installation or setting of any audio video device, then email us today at admin @trackdish.com
